上安装运营,04中安装nVidia新版显卡驱动

By admin in 美高梅手机版4858 on 2019年7月14日

Nexus S 是Samsung给谷歌(Google)生的亲外孙子,它应用的是谷歌(Google)
Android 2.3
系统。以前有人把 MeeGo 移植到了 Nexus S 上,未来又有胸口痛友把
Ubuntu Linux 嫁给了
Nexus S 。在 Nexus S 上运营 Ubuntu 系统的秘诀和在 Nexus S 上运转MeeGo
的章程是同等的。 Ubuntu 的镜像文件是应用的是 HD2 Ubuntu image (v
0.3),也正是原先把有人把 Ubuntu 安装到 HUAWEI HD2 上所用的十三分镜像。

环境:Ubuntu 8.04
英特尔64,AMD-glx-new突显驱动

Fix catalyst driver in Ubuntu 13.04 / 13.10(墙外文章备份)

 

我们曾经报导过 在 iPhone 3G 上运行 Android
2.3
的音讯,改动手提式有线电话机原始系统的头疼友更加多了,大家如同早就以为到手提式有线电话机DIY的一代即现在临了。

指标:安装英特尔新版驱动173.14.05。

1. Introduction

I found lots of people struggling to get catalyst driver work in Ubuntu
13.04. This issue has been persistent for some laptops, ever since
Ubuntu 13.04 came out, specially for Intel, AMD dual graphics setup. For
people, who have been looking at catalyst drivers ever
since http://ubuntuforums.org/showthread.php?t=1930450 post
was published, should not be that hard to find the solution, but for
those who are new to Linux, or don’t have time for these kinds of
issues, this might be a show stopper bug.

 

转自:
 

查阅 Ubuntu 系统装置在 Nexus S 上格局请见下边

步骤:

2. Installation

I removed the downgrading libudev and xserver-xorg-video section.
Therefore, if you want to install 13.4 stable follow this
link.
For this tutorial, I will be using 13.11 beta 1
driver.
I recommend you download the beta driver
from here.
I don’t always test the newer versions (let me know if there is some
problem installing the newer versions). Unless AMD changes compatibility
with xorg, kernel and xserver-xorg-video-intel it should be fine.

If possible, always use latest drivers. Before downloading the driver,
make sure to read the release note (found in the download page) to find
out the supported kernel and xorg versions and bug fixes.
Download catalyst driver from here and
unzip it in a directory. Using command line and building packages is
the preferred method of installing the driver.

Press the power button on your system, and after few moments you see the
Linux login prompt.
Have you ever wondered what happens behind the scenes from the time you
press the power button until the Linux login prompt appears?

Ok, so following on from the MeeGo thread, I have Ubuntu booting on the
Nexus S using the same method and same kernel.

  1. 下载驱动包:

  2. 统统除去原驱动,包蕴Ubuntu自带的nv驱动和Intel-glx-new驱动:
    此步骤极度首要。参照他事他说加以考察拉脱维亚语如下。

i. Using a GUI method

Using a terminal go to the directory, where you have unzipped the file
and run following command.

sudo sh ./amd*.run

美高梅手机版4858 1

It should open up a GUI, which you can use to easily install the driver.
After reboot, you can follow from Step 4 of this tutorial. However,
If you want to play 32-bit games as well, install necessary library
using following command and then follow Step 4. If you are on ubuntu
13.10, ia32-libs is not available (see 32-bit library installation
problem
).

sudo apt-get install ia32-libs lib32gcc1 libc6-i386

Note: Many people have reported
lots of
problems
(graphics and library) using above method. If you have graphics related
errors, make sure you follow following option. However, make sure you
properly remove this package (5. Reset Everything), before going
with following option.

32-bit library installation
problem: In ubuntu 13.10, ia32-libs meta package is not
present. If you get error while playing some 32-bit games, you need to
install the 32-bit counter part of the package that provides the library
with :i386 suffix. E.g If the error mentions libGLU.so.1, you
need to install libglu1-mesa:i386 and so on. You can inspect
necessary packages fromthis
link or if
you want to install the packages I installed (after inspecting
ia32-libs dependency in ubuntu 13.04), install them from this
link.

The following are the 6 high level stages of a typical Linux boot
process.
美高梅手机版4858 2

美高梅手机版4858 3

If you wish to install the NVIDIA Linux graphics driver on a
Fedora Core 6, Fedora
7/9 or RHEL5 system, please ensure that your system meets the following
requirements:

ii. Using command line and building the packages

a. Install the packages you need to
compile the driver

sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++6 dkms libqtgui4 wget execstack libelfg0 dh-modaliases linux-headers-generic xserver-xorg-core libgcc1

b. Fix 64-bit dependency issue (ia32-libs is not available for
ubuntu 13.10, see above)

sudo apt-get install ia32-libs lib32gcc1 libc6-i386

c. Remove old fglrx driver ( if
installed already), and reboot. If you have used GUI method to install,
see 5. Reset Everything below
instead.

sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev*
sudo rm /etc/X11/xorg.conf
sudo apt-get install --reinstall xserver-xorg-core xserver-xorg-video-intel libgl1-mesa-glx libgl1-mesa-dri libgl1-mesa-glx:i386 libgl1-mesa-dri:i386
sudo dpkg-reconfigure xserver-xorg
sudo reboot

d. Build and install the downloaded driver. Using a terminal go to the
directory, where you have unzipped the file and run following commands.

sudo sh ./amd-*.run --buildpkg Ubuntu/raring
sudo dpkg -i fglrx*.deb
sudo aticonfig --initial -f
sudo reboot

For ubuntu 13.10, use Ubuntu/saucy. You can find out the string
using following command.

sh ./amd-*.run --listpkg

e. If second last command does not execute (say it complains about not
having any graphics card installed), you might have turned off AMD
graphics card using vgaswitcheroo switch, which you can enable using
following command and then will be able to execute above command (before
reboot). If you have already rebooted, go to a virtual terminal (**Ctrl

  • Alt + F1**), before login, and run above command (second last) to
    create xorg.conf file.

    sudo su
    echo ON > /sys/kernel/debug/vgaswitcheroo/switch

Also, if you later plan to remove
catalyst and go withopen source only
option,
you can copy following line into /etc/rc.local file (before exit
0
) and this will turn off your AMD graphics card at boot and fix the
heating caused by AMD graphics card.

echo OFF > /sys/kernel/debug/vgaswitcheroo/switch

 

The Ubuntu image used is the HD2 Ubuntu image (v 0.3), loaded from a
file on the internal memory (again, no flashing required – you can thank
me later).

\ the latest update kernel is installed and in use
* a kernel-devel RPM is installed that corresponds to the kernel that
is in use. Note, FC6 has a known bug which occasionally installs a
kernel-devel RPM that is a different arch than the kernel (i586 & i686
mixed). See:
\ the pkgconfig and xorg-x11-server-sdk RPMs are installed (only
applies to FC6)
* Xen kernels are not currently supported*

3. Other Errors

  1. BIOS

The touchscreen isn’t yet working, but that’s my kernel at fault. Will
fix that with the MeeGo stuff.

The items above can be addressed with the following commands (they need
to be run as root):
# yum install kernel-devel xorg-x11-server-sdk pkgconfig
# yum update
# reboot

a. Fix unity, if it broke during installation (this will reset your Desktop)
cd ~/.config
rm -rf compiz-1 dconf gnome-session

You can also install compizconfig-settings-manager (cccsm) and
enable OpenGL and Ubuntu Unity Plugin to get back the dash and
other visual components.

    BIOS stands for Basic Input/Output System
    Performs some system integrity checks
    Searches, loads, and executes the boot loader program.
    It looks for boot loader in floppy, cd-rom, or hard drive. You can
press a key (typically F12 of F2, but it depends on your system) during
the BIOS startup to change the boot sequence.
    Once the boot loader program is detected and loaded into the memory,
BIOS gives the control to it.
    So, in simple terms BIOS loads and executes the MBR boot loader.

If you want to try this yourself, first grab yourself a copy of Ubuntu
for HD2, and take just the rootfs.ext2 file and drag it to your Nexus S
(put it in a folder called ‘ubuntu’ – lowercase is important上安装运营,04中安装nVidia新版显卡驱动。!).

If you are using an SMP (multi-CPU and/or multi-core) enabled system in
FC5(only), please replace kernel-devel with kernel-smp-devel in the
command above.

b. TF2, Dota 2, Steam OpenGL or networking error

i. If other applications runs, but
steam fails to start  with proper OpenGL support while using AMD
drivers, you may choose to follow the command line and building
the packages
option, and if that does
not fix the problem, you might have to clean up and re-install
Steam.

美高梅手机版4858 4

Move SteamApps directory to some other place (it will be very fast,
if you don’t change the drive), and re-install steam. You can move
back that directory, after first login.

ii. If you get following error while playing TF2 or Dota 2

Required OpenGL extension “GL_EXT_texture_sRGB_decode” is not
supported. Please update your OpenGL driver

It is probably because of a file in your home directory
called .drirc. To fix this error, delete this hidden file logout
login back and start the game in Steam. If it still does not work, make
sure libtxc-dxtn-s2tc0 is installed. Also, you can create another
user, copy or link steam related files and directories (~/.steam,
~/.local/share/Steam, ~/.steampid, ~/.steampath) and start
Steam using this new account, to see if the error exists.

iii. While using AMD card, if it fails to login, it might be because of
this
error.

Adding following text to /etc/hosts might solve the network related
error. However, use this text only if it fails due to networking issue.

87.248.210.253    media.steampowered.com
  1. MBR

Then use fastboot to boot the following image (or flash it to recovery
partition if you’re daring and know how dangerous that can be):

The SELinux requirement can be addressed via two mechanisms after the
NVIDIA Linux graphics driver has been installed:

c. GPU Hang

With Intel drivers you might get sudden desktop freeze, or programs may
slow down. Let us find out if it is actually a GPU hang issue, that I am
talking about.

While the desktop or some application freezes, go to a virtual terminal
(Ctrl + Alt + F1), login and run following command

tail /var/log/Xorg.0.log
i915_hangcheck_hung *ERROR* Hangcheck timer elapsed... GPU hung
capturing error event; look for more information in /debug/dri/0/i915_error_state

If you get error like this, you could fix this issue temporarily by
killing gnome-session using

sudo killall gnome-session

Capture values of log files under /var/log directory (at runtime)
using following command and report the bug to appropriate project or
search online for that error.

tail -f /var/log/logfile > ~/logfile

Note: Here logfile could be any
file under /var/log directory, specially dmesg, Xorg.0.log,
syslog etc.

Also make sure, you set game settings to lower, if you want to play it
using Intel graphics card.

If you get slow frames per second in wine while using AMD graphics card,
it might be because of the input lag that has not been fixed for a long
time. For Intel graphics card in wine there is this sudden drop in FPS.
I suggest you install software packages called htop (sudo apt-get
install htop) and xosd-bin (sudo apt-get install xosd-bin). Run
htop in a virtual terminal (Ctrl + Alt + F1) and run game with
following command (to show frame per seconds on the screen).

WINEDEBUG=fps wine yourgame.exe 2>&1 | tee /dev/stderr | grep --line-buffered "^trace:fps:" | osd_cat

When game starts to lag and frame per seconds drops, switch to the
virtual terminal, wait till the cpu percentage for the game process
drops to normal (below 100) and switch back to X (Ctrl + Alt + F7)
and continue playing. I was experimenting
with xf86-video-intel-2.99.903 and
the installation process was not seamless. I found this package to be
quite good (only  two or three instances of severe lag). Therefore,
upgrade to this version (when it releases) and use above method to see
how it performs. In my test, I found in one of the games under wine
(1.7.1)
, Intel graphics card to have better frame per seconds than the
catalyst driver.

    MBR stands for Master Boot Record.
    It is located in the 1st sector of the bootable disk. Typically
/dev/hda, or /dev/sda
    MBR is less than 512 bytes in size. This has three components 1)
primary boot loader info in 1st 446 bytes 2) partition table info in
next 64 bytes 3) mbr validation check in last 2 bytes.
    It contains information about GRUB (or LILO in old systems).
    So, in simple terms MBR loads and executes the GRUB boot loader.

You will need to do one minor edit once the device is booted; you will
see the screen output is very weird; ADB push the following file to
/etc/X11/xorg.conf, and then reboot Ubuntu:

1) If you do not wish to use SELinux enforcement, you can disable it by
running the `setenforce 0` command before starting X, or by adding
selinux=0 to the end of the kernel line in /etc/grub.conf and
rebooting.

4. Test

a. Run fgl_glxgears and check the speed.

$ fgl_glxgears

b. If you have dual graphics cards (Intel and AMD), switch between
both and see if they work

sudo aticonfig --px-igpu # for integrated intel card
sudo aticonfig --px-dgpu # for discrete amd card
aticonfig --pxl  # list currently active card
  1. GRUB

If you’re in any way interested, please click the thanks button!
Otherwise, enjoy!

2) If you wish to use SELinux enforcement, you will need to change the
security context of the NVIDIA X driver module and of the server-side
NVIDIA GLX extension module. To achieve this, please run the commands
listed for your platform below:

5. Reset Everything

If this solution did not work for you, it is time to reset everything
and go back to where you were before the installation.

If you had used GUI method to install the catalyst driver, you can
remove catalyst driver using following command.

sudo sh /usr/share/ati/fglrx-uninstall.sh

After reboot, it should work as it used to work before the installation.

If you had used command line
and building the packages method
,
you don’t have to do anything
other than repeat commands at 2.c above. I will list them once again
anyway.

sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev*
sudo rm /etc/X11/xorg.conf
sudo apt-get install --reinstall xserver-xorg-core xserver-xorg-video-intel libgl1-mesa-glx libgl1-mesa-dri libgl1-mesa-glx:i386 libgl1-mesa-dri:i386  
sudo dpkg-reconfigure xserver-xorg 
sudo reboot

    GRUB stands for Grand Unified Bootloader.
    If you have multiple kernel images installed on your system, you can
choose which one to be executed.
    GRUB displays a splash screen, waits for few seconds, if you don’t
enter anything, it loads the default kernel image as specified in the
grub configuration file.
    GRUB has the knowledge of the filesystem (the older Linux loader
LILO didn’t understand filesystem).
    Grub configuration file is /boot/grub/grub.conf (/etc/grub.conf is a
link to this). The following is sample grub.conf of CentOS.

要用到的 xorg.conf 与 bootUbuntu.img 镜像文件在Linux公社FTP里

Linux/x86 (32-bit):
# chcon -t texrel_shlib_t
/usr/lib/xorg/modules/drivers/nvidia_drv.so
# chcon -t texrel_shlib_t
/usr/lib/xorg/modules/extensions/libglx.so.1.0.9631
# chcon -t texrel_shlib_t /usr/lib/tls/libnvidia-tls.so.1
# chcon -t texrel_shlib_t /usr/lib/libGLcore.so.1.0.9631

6. Graphical Card Switcher (Optional)

As you saw in 4 (above), you can switch between two graphics cards
using the command line. Firing up command line each time you want to
switch graphics cards is not very intuitive. In that case, you could
open Catalyst Control Center using sudo amdcccle and press the
appropriate radio button and logout and login back. Since, even that
step is not that good, I thought I would share a script that does it for
me. Create a file in the bin directory of your home folder called
switchamdintel.pl (you can name it anything you like) with following
content.

#!/usr/bin/perl
$checkGraphicsCommand = ` aticonfig --pxl`;
chomp $checkGraphicsCommand;
if ($checkGraphicsCommand eq "PowerXpress: Integrated GPU is active (Power-Saving mode).") {
 # Activate the discrete GPU driver 
 system "pkexec aticonfig --px-dgpu && pkill gnome-session"
} else {
 # Activate the integrated intel HD driver
 system "pkexec aticonfig --px-igpu && pkill gnome-session"
}

Next, create a desktop file called switchamdintel.desktop inside
~/.local/share/applications directory (i.e the hidden folder inside
your home directory, press Ctrl + H to show it) with following
content.

[Desktop Entry]
Name=Switch AMD Intel 
Comment=Switch to AMD Graphics card
Exec=/home/username/bin/switchamdintel.pl
Icon=/home/username/Icons/amd-intel.png
Terminal=false
Type=Application
Categories=System

As you might have guessed, in above script you should change
username to your actual username and place a 256×256 png image
of something that says amd and intel inside Icons directory
called amd-intel.png. Also, adjust path of Exec and Icon
path to locations where these files are located. If string comparison
line in above perl script is different, change it to the actual output
thrown by aticonfig –pxl command.

美高梅手机版4858 5

Make both files executable using chmod +x filename. If you logout
and login, from now on you can search switch keyword in unity dash
or go to System category in application menu and launch the
switcher. It will change the graphics cards and logout.

Hope it helps. Cheers !!

About these
ads

    #boot=/dev/sda
    default=0
    timeout=5
    splashimage=(hd0,0)/boot/grub/splash.xpm.gz
    hiddenmenu
    title CentOS (2.6.18-194.el5PAE)
          root (hd0,0)
          kernel /boot/vmlinuz-2.6.18-194.el5PAE ro root=LABEL=/
          initrd /boot/initrd-2.6.18-194.el5PAE.img

FTP地址:

Linux/x86-64 (64-bit):
# chcon -t texrel_shlib_t
/usr/lib64/xorg/modules/drivers/nvidia_drv.so
# chcon -t texrel_shlib_t
/usr/lib64/xorg/modules/extensions/libglx.so.1.0.9631
# chcon -t texrel_shlib_t /usr/lib64/libGLcore.so.1.0.9631
# chcon -t texrel_shlib_t /usr/lib64/tls/libnvidia-tls.so.1

Share this:

  • Twitter
  • Google
  • Facebook

    As you notice from the above info, it contains kernel and initrd
image.
    So, in simple terms GRUB just loads and executes Kernel and initrd
images.

用户名:www.linuxidc.com

Debian GNU/Linux or [K]Ubuntu with Xorg 7.x

Like this:

Like Loading…

23
Comments

Filed under
Uncategorized

Tagged as
13.04,
13.10,
15,
amd,
catalyst,
GL_EXT_texture_sRGB_decode,
graphics,
linux美高梅手机版4858 ,,
mint,
olivia,
ubuntu

  1. Kernel

密码:www.muu.cc

If you wish to install the NVIDIA Linux graphics driver on a Debian
GNU/Linux or Ubuntu system that ships with Xorg 7.x, please ensure that
your system meets the following requirements:

23 Responses to Fix catalyst driver in Ubuntu 13.04 / 13.10

  1. 美高梅手机版4858 6
    SutoCom

    June 1, 2013 at 12:16
    pm

    Reblogged this on Sutoprise Avenue, A SutoCom
    Source.

    Reply

    • 美高梅手机版4858 7 gabriel
      l

      October 23, 2013 at 1:59
      am

      13.11 beta driver gui install works in ubuntu 13.10 64-bit. I
      don’t plan on gaming (yet) so I have not tried the rest of this
      guide. I appreciate your help.

      Reply

  2. 美高梅手机版4858 8 Nazar
    Yagshimamedov

    June 22, 2013 at 2:09
    am

    I usually prefer not to login with my facebook account on any sites
    but I really needed to thank you for this brilliant solution! This
    worked for me wonderfully! Thank you very much!

    My system:

    Sony Vaio VPCCB
    Intel/AMD Radeon HD 6630M hybrid graphics
    Ubuntu 13.04 64bit

    Reply

  3. 美高梅手机版4858 9 Santosh
    Srinivas (@TweetSKS)

    June 26, 2013 at 4:00
    am

    I followed these steps and everything seemed to work fine. Does the
    AMD Catalyst Control center install in these steps too? I am unable
    to find it.

    Any idea to install / start it?

    Reply

    • 美高梅手机版4858 10
      xpressrazor

      June 26, 2013 at 12:13
      pm

      Yes it does, you can run it using

      sudo amdcccle

      For some reason gksu or gksudo does not seem to work

      Reply

  4. 美高梅手机版4858 11 cutoverrooster

    July 10, 2013 at 11:52
    am

    Thanks so much. Went through numerous other tutorials, but finally
    this was the one that worked.

    Cheers.

    Reply

  5. 美高梅手机版4858 12 Rafael L
    Zúñiga-Rodríguez

    August 3, 2013 at 6:14
    am

    Thanks for the tutorial. After long time struggling with Catalyst
    drivers with Linux in my laptop, finally one solution that really
    helped!

    The driver is working fine. But even though I locked libudev0 and
    xserver-xorg-video-intel in Synaptic as recommended, every time the
    system runs an update, I have to reinstall again both of them due
    “low-graphics mode error”. Last time after the reinstallation of
    those two files, I was not able to fix Unity, so I moved to Gnome
    3.6 which is working fine for the moment.

    Any recommendation to tackle this issue will be appreciated…

    Cheers!!!!

    My system:
    HP Pavilion dv7
    Intel/AMD Radeon HD 6730M/6770M/7690M XT hybrid graphics
    Using Catalyst 13.4
    Ubuntu 13.04 64bit

    Reply

    • 美高梅手机版4858 13
      xpressrazor

      August 3, 2013 at 8:25
      am

      A nice approach, after you have done some graphics related work
      (that could possibly break the desktop environment) is to login
      into Guest Session (for test), before login with your actual
      username.

      Anyways, following commands fixes unity for me (be aware it
      deletes all browser bookmarks too), if I haven’t broken the
      graphics drivers.

      cd ~/.config

      rm -rf compiz-1 dconf evolution gnome-session gtk-3.0 ibus
      libaccounts-glib nautilus Trolltech.conf ubuntuone
      update-notifier user-dirs.dirs user-dirs.locale

      The beta driver, I have mentioned in this tutorial does not need
      to lock libudev and xserver-xorg-video-intel in Ubuntu or Linux
      Mint.

      Reply

  6. 美高梅手机版4858 14 Rafael L
    Zúñiga-Rodríguez

    August 3, 2013 at 1:37
    pm

    Thanks xpressrazor! I was able fix Unity!

    regarding the beta driver, originally I installed the one available
    last weekend (ver. 13.15.100.1-linux-x86.x86_64) and didnt worked
    for me (the screen kept freezing, no bottons at the top of the
    windows and so on). I downloaded and installed ver. 13.4. (which is
    working fine until the automatic upgrades).

    I will take my chances with the new beta (ver. 13.8) and keep you
    informed of the results…

    Thanks again mate!

    cheers!

    Reply

  7. 美高梅手机版4858 15 Grayson
    Barflet

    August 22, 2013 at 5:01
    pm

    ^ I just installed the 13.8 beta with this method, works fine.
    My system:
    Asus N56DP running Linux Mint 15 Cinnamon 64bit
    Radeon 7730M

    So should I go ahead and unlock libudev and
    xserver-xorg-video-intel?

    Reply

    • 美高梅手机版4858 16
      xpressrazor

      August 23, 2013 at 1:26
      am

      Yes.

      You don’t need to downgrade libudev and xserver-xorg-video-intel
      any more (with current beta drivers).

      Cheers !!

      Reply

  8. 美高梅手机版4858 17 Ecil Teodoro
    ஃ (@EcilTeodoro)

    August 26, 2013 at 1:03
    am

    I followed all the steps, but at boot time, instead of taking me to
    the user login screen, it takes me to a command prompt login (like a
    server).
    To recover system, I have to manually restore original xorg.conf.

    Kubuntu 13.04
    Catalyst beta 13.8
    Samsung Chronos7, Radeon HD6750M and Intel graphics

    Reply

    • 美高梅手机版4858 18
      xpressrazor

      August 26, 2013 at 3:29
      am

      If it does not work, you should be able to restore back to your
      original open source drivers using step 5. Installing AMD
      graphics driver is not always seamless in Linux. After removing
      the catalyst driver and removing xorg.conf (or restoring to
      original version), if it still throws you to the command prompt,
      you need to install the meta package that fixes lots of these
      issues. In case of ubuntu the command is.

      sudo apt-get install ubuntu-desktop

      and in case of kubuntu it is

      sudo apt-get install kubuntu-desktop

      Having said that, I still wonder, why it did not work for you. I
      hope you downloaded catalyst 13.8 beta 2, went with the manual
      installation steps, created the xorg.conf file using “aticonfig
      –initial -f” command and made sure new /etc/X11/xorg.conf file
      is created.

      One more thing you could do before catalyst drive installation
      is run following commands.

      sudo apt-get update
      sudo apt-get dist-upgrade

      In my case, if I only have open source drivers, I always make
      sure that I have deleted the /etc/X11/xorg.conf file (I don’t
      know what you meant by restore). On the other hand, when I have
      installed catalyst driver, I always make sure /etc/X11/xorg.conf
      file is created with “aticonfig –initial -f” command.

      If this does not work, you might as well give xorg-edger ppa’s
      fglrx installer a try.

      Thanks for the response.

      Reply

  9. 美高梅手机版4858 19
    gamerchick02

    August 30, 2013 at 12:13
    am

    Reblogged this on Amy’s
    Ramblings
    and commented:
    This is great and I want to be able to fix my Ubuntu ATI drivers
    after the kernel updates again.

    Reply

  10. 美高梅手机版4858 20 Pawan
    Kumar

    September 22, 2013 at 8:05
    am

    Works like a charm!! I had almost given up on installing AMD drivers
    on my Ubuntu 13.04. I had tried like hundreds of different methods
    but none of them worked. This did. Thanks a lot @xpressrazor.

    Reply

  11. 美高梅手机版4858 21 Julian
    Alarcon

    October 12, 2013 at 9:35
    pm

    Ok, I’m gonna say it:

    THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK
    YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU
    THANK YOU THANK YOU THANK YOU THANK YOU

    Finally!!! After more than 2 years, my AMD GPU is working on Ubuntu!
    I tried many thing before.

    Right now all seems to be working fine, Using lastest drivers 13.12
    betav1 on Ubuntu 13.10. All seems to be working fie, just the fan a
    little lousy, but this is great!

    Thanks again!

    Reply

  12. 美高梅手机版4858 22 Gaurav Pravin
    Dighe

    November 23, 2013 at 6:29
    am

    After installing ATI Catalsyt Driver in Ubuntu 13.10, there is an
    increase in login time and logout time. I never experienced this in
    Ubuntu 13.04.

    Is there any solution for this?

    Reply

  13. 美高梅手机版4858 23 Jason
    Yang

    November 24, 2013 at 10:51
    pm

    Hey, I have a Sony VPCZ2190X which has a removable external card
    which essentially acts like a dual graphics setup when connected.
    Whenever i try to start X with the card attached, i get a kernel
    panic. Im using 13.10 and the latest beta driver at the time of this
    post (13.11 beta 9.2) Is there something im missing?

    Reply

  14. 美高梅手机版4858 24 Maxence
    COTE (@MaxenceCOTE)

    December 6, 2013 at 3:11
    pm

    Hi, thank you a lot for the tutorial it worked great on my previous
    system Mint 15 64bits (ubuntu 13.4) but I’m experiencing an odd
    issue on mint 16 (ubuntu 13.10).

    Using the manual install I cannot build the debs for saucy, it says
    something in the lines of “error: distribution not supported”

    Indeed the “–listpkg” option confirmed the lack of support for saucy
    which doesn’t make sense?!
    Automatic install worked but stopped working after the next reboot.

    This is driving me crazy, even the unofficial amd wiki uses your
    metthod and don’t aknowledge this
    issue(http://wiki.cchtml.com/index.php/Ubuntu\_Saucy\_Installation\_Guide).
    I haven’t found anyone else except this german dude encountering the
    same issue:
    http://www.computerbase.de/forum/showthread.php?t=1287092&p=14926944
    As a result I am using Xedgers ppa but this is no optimal solution.

    Reply

    • 美高梅手机版4858 25
      xpressrazor

      December 6, 2013 at 4:23
      pm

      Just to check, I ran --listpkg against some catalyst versions
      (even as old as catalyst-12.10) in Ubuntu 13.10 and all show
      Ubuntu/saucy. I don’t know what to say (I too am confused now,
      as how can even such an old version of catalyst show
      Ubuntu/saucy). I used to use Mint (as one of my distros) few
      months back, but these days I have replaced it with something
      else as my second distro, therefore whatever I say wouldn’t
      address your issue.

      Reply

  15. 美高梅手机版4858 26 Yi
    Zhao

    December 18, 2013 at 2:11
    am

    I ran the –listpkg and got the following packages with Ubuntu:

    Ubuntu/gutsy
    Ubuntu/hardy
    Ubuntu/intrepid
    Ubuntu/jaunty
    Ubuntu/karmic
    Ubuntu/lucid
    Ubuntu/maverick
    Ubuntu/natty
    Ubuntu/oneiric
    Ubuntu/precise
    Ubuntu/quantal
    Ubuntu/raring
    Ubuntu/source

    Is it possible that Ubuntu/source meant to ne Ubuntu/saucy?

    Reply

    • 美高梅手机版4858 27
      xpressrazor

      December 18, 2013 at 2:34
      am

      No, saucy comes up as Ubuntu/saucy in 13.10. Ubuntu/source used
      to be there all the time. However, when I checked it from
      non-ubuntu OS (or non 13.10 distro e.g Arch) 13.11beta showed
      only till Ubuntu/raring (and Ubuntu/source of course).

      Reply

  16. 美高梅手机版4858 28 Uma
    Devi

    January 7, 2014 at 11:43
    am

    how to fix slow graphics performances

    i’m using ubuntu 13.04 slow performance then i upgrade the os but
    graphics card was not starting at low level

    my system config….
    Memory 2.0Gib
    Processor AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ × 2
    Graphics Gallium 0.4 on llvmpipe (LLVM 3.2, 128 bits)
    OS type 32 bit
    Disk 76.5GB

    How to increase the performance….. Any one help me out from this
    problem

    Reply

    Mounts the root file system as specified in the “root=” in
grub.conf
    Kernel executes the /sbin/init program
    Since init was the 1st program to be executed by Linux Kernel, it
has the process id (PID) of 1. Do a ‘ps -ef | grep init’ and check the
pid.
    initrd stands for Initial RAM Disk.
    initrd is used by kernel as temporary root file system until kernel
is booted and the real root file system is mounted. It also contains
necessary drivers compiled inside, which helps it to access the hard
drive partitions, and other hardware.

在2011年LinuxIDC.com\1月\在 Nexus S 上设置运转 Ubuntu 系统\

\ development tools like make and gcc are installed
* the linux-headers package matching the installed Linux kernel is
installed
* the pkg-config and xserver-xorg-dev packages are installed
* the nvidia-glx package has been uninstalled with the –purge option
and the files /etc/init.d/nvidia-glx and /etc/init.d/nvidia-kernel do
not exist
If you use Ubuntu, please also ensure that the linux-restricted-modules
or linux-restricted-modules-common packages have been uninstalled.
Alternatively, you can edit the /etc/default/linux-restricted-modules or
/etc/default/linux-restricted-modules-common configuration file and
disable the NVIDIA linux-restricted kernel modules (nvidia,
nvidia_legacy) via:*

  1. Init

美高梅手机版4858 29

DISABLED_MODULES=”nv nvidia_new”
Additionally, delete the following file if it exists:
/lib/linux-restricted-modules/.nvidia_new_installed
Please note: unfortunately, it has become difficult to keep track of the
pre-/post-installation steps required for [K]Ubuntu, and the above
instructions may be incomplete. If in doubt, it is recommended that you
use your distributor’s NVIDIA Linux graphics driver packages,
exclusively.

    Looks at the /etc/inittab file to decide the Linux run level.
    Following are the available run levels
        0 – halt
        1 – Single user mode
        2 – Multiuser, without NFS
        3 – Full multiuser mode
        4 – unused
        5 – X11
        6 – reboot
    Init identifies the default initlevel from /etc/inittab and uses
that to load all appropriate program.
    Execute ‘grep initdefault /etc/inittab’ on your system to identify
the default run level
    If you want to get into trouble, you can set the default run level
to 0 or 6. Since you know what 0 and 6 means, probably you might not do
that.
    Typically you would set the default run level to either 3 or 5.

  1. 重复开动,并关闭xserver:
    关闭xserver命令(gnome):
    sudo /etc/init.d/gdm stop

  2. 安装驱动:
    sudo sh ./NVIDIA-Linux-x86_64-173.14.05-pkg2.run

  3. 启动xserver:
    sudo /etc/init.d/gdm start

  4. 调度分辨率:
    假诺开发银行后显得分辨率不健康,须求修改xorg.conf。
    cd /etc/X11
    sudo cp xorg.conf xorg.conf.mybackup
    sudo vi /etc/X11/xorg.conf

  1. Runlevel programs

确认Device里面包车型大巴Driver一项定义是”Intel;
除去Monitor定义里面包车型地铁Modeline一行;
Screen里面Modes一行改为
Modes “nvidia-auto-select”

    When the Linux system is booting up, you might see various services
getting started. For example, it might say “starting sendmail …. OK”.
Those are the runlevel programs, executed from the run level directory
as defined by your run level.
    Depending on your default init level setting, the system will
execute the programs from one of the following directories.
        Run level 0 – /etc/rc.d/rc0.d/
        Run level 1 – /etc/rc.d/rc1.d/
        Run level 2 – /etc/rc.d/rc2.d/
        Run level 3 – /etc/rc.d/rc3.d/
        Run level 4 – /etc/rc.d/rc4.d/
        Run level 5 – /etc/rc.d/rc5.d/
        Run level 6 – /etc/rc.d/rc6.d/
    Please note that there are also symbolic links available for these
directory under /etc directly. So, /etc/rc0.d is linked to
/etc/rc.d/rc0.d.
    Under the /etc/rc.d/rc*.d/ direcotiries, you would see programs
that start with S and K.
    Programs starts with S are used during startup. S for startup.
    Programs starts with K are used during shutdown. K for kill.
    There are numbers right next to S and K in the program names. Those
are the sequence number in which the programs should be started or
killed.
    For example, S12syslog is to start the syslog deamon, which has the
sequence number of 12. S80sendmail is to start the sendmail daemon,
which has the sequence number of 80. So, syslog program will be started
before sendmail.

修改后再行开动xserver。Ctrl-Alt-Backspace。

There you have it. That is what happens during the Linux boot process.

  1. 调解个体分辨率配置:
    借使登陆分界面分辨率常常,但用户登入后改成低分辨率,供给在个人采用里面调节:
    System -> Preferences -> Screen Resolutions

  2. 展现驱动细节调解:
    sudo nvidia-settings

完!

无法不用root权限运营,不然配置一点都不大概保存到xorg.conf里面。

搞定。

PS,新驱动比Ubuntu自带的英特尔-glx-new呈现效果强太多了,画面变得通透,没了雾蒙蒙的感到。

原创:Coffee & Beer

美高梅手机版4858 30

发表评论

电子邮件地址不会被公开。 必填项已用*标注

网站地图xml地图
Copyright @ 2010-2019 美高梅手机版4858 版权所有