0编写翻译安装

By admin in 美高梅手机版4858 on 2019年4月10日

参考:

参考:

Centos 7 nginx-一.1二.0编写翻译安装,centosnginx-一.1二.0

参考:
也不理解自家的连串是还是不是有这个注重包,试试吧?缺乏什么笔者就装什么样吗,多踏点坑总是能学到点东西的.
  获取nginx包 configure
–sbin-path=/user/local/nginx/nginx
–conf-path=/usr/local/nginx/nginx.conf
–pid-path=/usr/local/nginx/nginx.pid   报错 ./configure: error: the
HTTP rewrite module requires the PCRE library. You can either disable
the module by using –without-http_rewrite_module option, or install
the PCRE library into the system, or build the PCRE library statically
from the source with nginx by using –with-pcre=<path> option    
获取pcre包 ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/
安装pcre cd /usr/local/src wget
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-八.三七.tar.gz
tar -zxvf pcre-捌.三7.tar.gz cd pcre-八.3四 ./configure
–prefix=/usr/local/pcre make make install   报错 configure: error: You
need a C++ compiler for C++ support.     安装gcc yum install gcc gcc-c++
再次安装pcre,成功安装pcre   重新安装nginx   ./configure
–sbin-path=/user/local/nginx/nginx
–conf-path=/usr/local/nginx/nginx.conf
–pid-path=/usr/local/nginx/nginx.pid 报错 ./configure: error: the HTTP
gzip module requires the zlib library. You can either disable the module
by using –without-http_gzip_module option, or install the zlib
library into the system, or build the zlib library statically from the
source with nginx by using –with-zlib=<path> option.   安装zlib
获取zlib包
[[email protected]
src]# tar -zxvf zlib-壹.贰.1一.tar.gz cd zlib-1.二.1壹 ./configure
–prefix=/usr/local/zlib make && make install   重新安装nginx
./configure –sbin-path=/user/local/nginx/nginx
–conf-path=/usr/local/nginx/nginx.conf
–pid-path=/usr/local/nginx/nginx.pid   make && make install   运行
[[email protected]
nginx]# systemctl start nginx Failed to start nginx.service: Unit
nginx.service failed to load: No such file or directory. 表明安装退步  
是或不是从未有过安装ssl呢,小编查到系统是有安装的,不放心自身就再安装三次吧.
./config –prefix=/usr/local –openssldir=/usr/local/ssl make && make
install ./config shared –prefix=/usr/local –openssldir=/usr/local/ssl
make clean make && make install   看来照旧照着教程安装才算可信赖 删除zlib
pcre 到相应目录运转 make uninstall   安装pcre cd /usr/local/src wget
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-八.3七.tar.gz
tar -zxvf pcre-八.3七.tar.gz cd pcre-八.34 ./configure
–prefix=/usr/local/pcre make make install   安装zlib 获取zlib包

[[email protected]
src]# tar -zxvf zlib-壹.二.11.tar.gz cd zlib-壹.二.1一 ./configure
–prefix=/usr/local/zlib make && make install   重新安装nginx
./configure –sbin-path=/usr/local/nginx/nginx \
–conf-path=/usr/local/nginx/nginx.conf \
–pid-path=/usr/local/nginx/nginx.pid \ –with-http_ssl_module
\
–with-pcre=/usr/local/src/pcre-8.40 \
–with-zlib=/usr/local/src/zlib-1.2.11 \
–with-openssl=/usr/local/src/openssl-1.0.2l  
[[email protected]
nginx-1.12.0]# ./configure –sbin-path=/usr/local/nginx/nginx \ >
–conf-path=/usr/local/nginx/nginx.conf \ >
–pid-path=/usr/local/nginx/nginx.pid \ local/src/openssl-1.0.2l>
–with-http_ssl_module \ > –with-pcre=/usr/local/src/pcre-8.40 \
> –with-zlib=/usr/local/src/zlib-1.2.11 \ >
–with-openssl=/usr/local/src/openssl-1.0.2l    
[[email protected]
nginx-1.12.0]# make && make install   修改/etc/local/nginx/nginx.conf
将lisent商品80改为8080 运转服务:/etc/local/nginx/nginx  
访问:   Welcome to nginx!   If you see this
page, the nginx web server is successfully installed and working.
Further configuration is required.   For online documentation and
support please refer to nginx.org. Commercial support is available at
nginx.com.   Thank you for using nginx.     运行nginx服务 方法1:
/usr/local/nginx/nginx 方法二(-c nginx配置文件地方):
/usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf   结束nginx服务
方法一:从容结束 查看进度
[[email protected]
nginx]# ps -ef | grep nginx root 6202四 一 0 0七:0一 ? 00:00:00 nginx:
master process /usr/local/nginx/nginx nobody 62025 62024 0 07:0一 ?
00:00:00 nginx: worker process root 6230捌 18453 0 0七:14 pts/1 00:00:00
grep –color=auto nginx 杀死进程
[[email protected]
nginx]# kill -QUIT 6202四   方法二:快捷截至 查看进程
[[email protected]
nginx]# ps -ef | grep nginx root 6235八 一 0 0柒:一七 ? 00:00:00 nginx:
master process /usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf
nobody 6235玖 6235八 0 0七:1七 ? 00:00:00 nginx: worker process root 62463
1845三 0 07:20 pts/一 00:00:00 grep –color=auto nginx 杀死进度
[[email protected]
nginx]# kill -TERM 62358 或者
[[email protected]
nginx]# /usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf
[[email protected]
nginx]# ps -ef | grep nginx root 62473 1 0 07:21 ? 00:00:00 nginx:
master process /usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf
nobody 62474 62473 0 07:21 ? 00:00:00 nginx: worker process root 62476
18453 0 07:21 pts/1 00:00:00 grep –color=auto nginx
[[email protected]
nginx]# kill -INT 6247三   方法三:强制结束
[[email protected]
nginx]# pkill -玖 nginx   感觉这些最佳记有未有?
前日简短安装就到此地,后天学一下配置. 

柒 nginx-1.12.0编写翻译安装,centosnginx-1.1二.0
参考:…

nginx安装

也不掌握小编的类别是或不是有那么些信赖包,试试吧?缺少什么小编就装什么样呢,多踏点坑总是能学到点东西的.

也不知晓笔者的连串是不是有那个信赖包,试试吧?缺乏什么笔者就装什么样呢,多踏点坑总是能学到点东西的.

nginx能够应用各平台的私下认可包来安装,本文是介绍使用源码编写翻译安装,包蕴具体的编写翻译参数音信。

 

 

专业启幕前,编写翻译环境gcc g++
开发库之类的内需超前装好,那里暗许你已经装好。

获取nginx包

获取nginx包

centos平台编写翻译环境使用如下指令

0编写翻译安装。安装make:

configure –sbin-path=/user/local/nginx/nginx
–conf-path=/usr/local/nginx/nginx.conf
–pid-path=/usr/local/nginx/nginx.pid

configure –sbin-path=/user/local/nginx/nginx
–conf-path=/usr/local/nginx/nginx.conf
–pid-path=/usr/local/nginx/nginx.pid

 

 

 

yum -y install gcc automake autoconf libtool make

报错

报错

 

./configure: error: the HTTP rewrite module requires the PCRE library.

./configure: error: the HTTP rewrite module requires the PCRE library.

安装g++:

You can either disable the module by using
–without-http_rewrite_module

You can either disable the module by using
–without-http_rewrite_module

 

option, or install the PCRE library into the system, or build the PCRE
library

option, or install the PCRE library into the system, or build the PCRE
library

yum install gcc gcc-c++

statically from the source with nginx by using –with-pcre=<path>
option

statically from the source with nginx by using –with-pcre=<path>
option

 

 

 

下边正式开班:

 

 

诚如大家都供给先装pcre, zlib,前者为了重写rewrite,后者为了gzip压缩。

获取pcre包

获取pcre包

 

ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/

ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/

注:上边所利用的拥有版本均为截止20一柒年十一月1四号,最新版本
1.选定源码目录
能够是其它目录,本文选定的是/usr/local/src

安装pcre

安装pcre

 

cd /usr/local/src

cd /usr/local/src

cd /usr/local/src

wget
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.37.tar.gz

wget
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.37.tar.gz

 

tar -zxvf pcre-8.37.tar.gz

tar -zxvf pcre-8.37.tar.gz

2.安装PCRE库
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/ 下载最新的 PCRE
源码包,使用下边发号施令下载编写翻译和安装 PCRE 包:

cd pcre-8.34

cd pcre-8.34

 

./configure –prefix=/usr/local/pcre

./configure –prefix=/usr/local/pcre

cd /usr/local/src

make

make

wget
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.41.tar.gz

make install

make install

tar -zxvf pcre-8.41.tar.gz

 

 

cd pcre-8.41

报错

报错

./configure

configure: error: You need a C++ compiler for C++ support.

configure: error: You need a C++ compiler for C++ support.

make

 

 

make install

 

 

 

安装gcc

安装gcc

 

yum install gcc gcc-c++

yum install gcc gcc-c++

3.安装zlib库
 下载最新的 zlib
源码包,使用上面发号施令下载编写翻译和装置 zlib包:

重复安装pcre,成功安装pcre

再也安装pcre,成功安装pcre

 

 

 

 

cd /usr/local/src

wget http://zlib.net/zlib-1.2.11.tar.gz

tar -zxvf zlib-1.2.11.tar.gz

cd zlib-1.2.11

./configure

make

make install

 

重新安装nginx

重新安装nginx

4.装置ssl(有个别vps暗中同意没装ssl)

 

 

 

./configure –sbin-path=/user/local/nginx/nginx
–conf-path=/usr/local/nginx/nginx.conf
–pid-path=/usr/local/nginx/nginx.pid

./configure –sbin-path=/user/local/nginx/nginx
–conf-path=/usr/local/nginx/nginx.conf
–pid-path=/usr/local/nginx/nginx.pid

cd /usr/local/src

报错

报错

wget

./configure: error: the HTTP gzip module requires the zlib library.

./configure: error: the HTTP gzip module requires the zlib library.

tar -zxvf openssl-1.0.2l.tar.gz

You can either disable the module by using –without-http_gzip_module

You can either disable the module by using –without-http_gzip_module

 

option, or install the zlib library into the system, or build the zlib
library

option, or install the zlib library into the system, or build the zlib
library

5.安装nginx

statically from the source with nginx by using –with-zlib=<path>
option.

statically from the source with nginx by using –with-zlib=<path>
option.

Nginx
一般有八个本子,分别是稳定版和开发版,您能够依据你的指标来摘取那多少个本子的个中叁个,下边是把
Nginx 安装到 /usr/local/nginx 目录下的详尽步骤:

 

 

 

安装zlib

安装zlib

cd /usr/local/src

获取zlib包

获取zlib包

wget

tar -zxvf nginx-1.13.4.tar.gz

[root@bogon src]# tar -zxvf zlib-1.2.11.tar.gz

[root@bogon src]# tar -zxvf zlib-1.2.11.tar.gz

cd nginx-1.13.4

cd zlib-1.2.11

cd zlib-1.2.11

 

./configure –prefix=/usr/local/zlib

./configure –prefix=/usr/local/zlib

./configure –sbin-path=/usr/local/nginx/nginx \

make && make install

make && make install

–conf-path=/usr/local/nginx/nginx.conf \

 

 

–pid-path=/usr/local/nginx/nginx.pid \

重新安装nginx

重新安装nginx

–with-http_ssl_module \

./configure –sbin-path=/user/local/nginx/nginx
–conf-path=/usr/local/nginx/nginx.conf
–pid-path=/usr/local/nginx/nginx.pid

./configure –sbin-path=/user/local/nginx/nginx
–conf-path=/usr/local/nginx/nginx.conf
–pid-path=/usr/local/nginx/nginx.pid

–with-pcre=/usr/local/src/pcre-8.41 \

 

 

–with-zlib=/usr/local/src/zlib-1.2.11 \

make && make install

make && make install

–with-openssl=/usr/local/src/openssl-1.0.2l

 

 

 

启动

启动

make

[root@bogon nginx]# systemctl start nginx

[root@bogon nginx]# systemctl start nginx

make install

Failed to start nginx.service: Unit nginx.service failed to load: No
such file or directory.

Failed to start nginx.service: Unit nginx.service failed to load: No
such file or directory.

 

证实安装退步

表明安装战败

–with-pcre=/usr/local/src/pcre-八.肆壹 指的是pcre-8.肆一 的源码路径。
–with-zlib=/usr/local/src/zlib-一.2.1一 指的是zlib-1.2.11 的源码路径。

 

 

 

是或不是绝非安装ssl呢,作者查到系统是有安装的,不放心自身就再设置二次吧.

是否从未有过设置ssl呢,笔者查到系统是有安装的,不放心本身就再安装3次吧.

设置成功:

./config –prefix=/usr/local –openssldir=/usr/local/ssl

./config –prefix=/usr/local –openssldir=/usr/local/ssl

设置成功后 /usr/local/nginx 会有此目录

make && make install

make && make install

 

./config shared –prefix=/usr/local –openssldir=/usr/local/ssl

./config shared –prefix=/usr/local –openssldir=/usr/local/ssl

 

make clean

make clean

6.启动
管教系统的 80 端口没被其余程序占用,运营/usr/local/nginx/nginx
命令来运行 Nginx,

make && make install

make && make install

 

 

 

开辟浏览器访问此机器的 IP,如果浏览器出现 Welcome to nginx! 则象征 Nginx
已经设置并运维成功。

如上所述依旧照着教程安装才算可信赖

因而看来仍然照着教程安装才算可相信

 

删除zlib pcre

删除zlib pcre


到相应目录运转 make uninstall

到相应目录运转 make uninstall

到此地nginx就设置到位了,假诺只是处理静态html就无须继续设置了

 

 

要是你需求处理php脚本的话,还亟需安装php-fpm。

安装pcre

安装pcre

 

cd /usr/local/src

cd /usr/local/src

 

wget
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.37.tar.gz

wget
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.37.tar.gz

广泛错误:

tar -zxvf pcre-8.37.tar.gz

tar -zxvf pcre-8.37.tar.gz

附:可能遇见的荒唐和1部分扶植消息

cd pcre-8.34

cd pcre-8.34

1.1编译pcre错误

./configure –prefix=/usr/local/pcre

./configure –prefix=/usr/local/pcre

 

make

make

make[1]: Leaving directory `/usr/local/src/pcre-8.34′

make install

make install

make: *** [all] Error 2

 

 

 

安装zlib

安装zlib

化解办法:安装g++,别忘了重新configure

获取zlib包

获取zlib包

 

apt-get install g++

[root@bogon src]# tar -zxvf zlib-1.2.11.tar.gz

[root@bogon src]# tar -zxvf zlib-1.2.11.tar.gz

apt-get install build-essential

cd zlib-1.2.11

cd zlib-1.2.11

make clean

./configure –prefix=/usr/local/zlib

./configure –prefix=/usr/local/zlib

./configure

make && make install

make && make install

make

 

 

 

重新安装nginx

重新安装nginx

 

./configure
–sbin-path=/usr/local/nginx/nginx \

./configure
–sbin-path=/usr/local/nginx/nginx \

1.2 make出错

–conf-path=/usr/local/nginx/nginx.conf
\

–conf-path=/usr/local/nginx/nginx.conf
\

 

–pid-path=/usr/local/nginx/nginx.pid
\

–pid-path=/usr/local/nginx/nginx.pid
\

make: *** No targets specified and no makefile found.  Stop.

–with-http_ssl_module \

–with-http_ssl_module \

 

–with-pcre=/usr/local/src/pcre-8.40
\

–with-pcre=/usr/local/src/pcre-8.40
\

奉公守法上边安装形式

–with-zlib=/usr/local/src/zlib-1.2.11
\

–with-zlib=/usr/local/src/zlib-1.2.11
\

yum -y install openssl openssl-devel

–with-openssl=/usr/local/src/openssl-1.0.2l

–with-openssl=/usr/local/src/openssl-1.0.2l

二.nginx编写翻译选项(下边代码必须在1行)

 

 

 

[root@bogon nginx-1.12.0]# ./configure
–sbin-path=/usr/local/nginx/nginx \

[root@bogon nginx-1.12.0]# ./configure
–sbin-path=/usr/local/nginx/nginx \

./configure –sbin-path=/usr/local/nginx/nginx \

> –conf-path=/usr/local/nginx/nginx.conf \

> –conf-path=/usr/local/nginx/nginx.conf \

–conf-path=/usr/local/nginx/nginx.conf \

> –pid-path=/usr/local/nginx/nginx.pid \

> –pid-path=/usr/local/nginx/nginx.pid \

–pid-path=/usr/local/nginx/nginx.pid \

local/src/openssl-1.0.2l> –with-http_ssl_module \

local/src/openssl-1.0.2l> –with-http_ssl_module \

–with-http_ssl_module \

> –with-pcre=/usr/local/src/pcre-8.40 \

> –with-pcre=/usr/local/src/pcre-8.40 \

–with-pcre=/usr/local/src/pcre-8.41 \

> –with-zlib=/usr/local/src/zlib-1.2.11 \

> –with-zlib=/usr/local/src/zlib-1.2.11 \

–with-zlib=/usr/local/src/zlib-1.2.11 \

> –with-openssl=/usr/local/src/openssl-1.0.2l

> –with-openssl=/usr/local/src/openssl-1.0.2l

–with-openssl=/usr/local/src/openssl-1.0.2l

 

 

 

 

[root@bogon nginx-1.12.0]# make && make install

[root@bogon nginx-1.12.0]# make && make install

 

 

修改/etc/local/nginx/nginx.conf 将lisent商品80改为8080

修改/etc/local/nginx/nginx.conf 将lisent商品80改为8080

启航服务:/etc/local/nginx/nginx

起步服务:/etc/local/nginx/nginx

 

 

访问:http://192.168.158.128:8080

访问:http://192.168.158.128:8080

 

 

Welcome to nginx!

Welcome to nginx!

 

 

If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.

If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.

 

 

For online documentation and support please refer to nginx.org.

For online documentation and support please refer to nginx.org.

Commercial support is available at nginx.com.

Commercial support is available at nginx.com.

 

 

Thank you for using nginx.

Thank you for using nginx.

 

 

 

 

启动nginx服务

启动nginx服务

方法一:

方法一:

/usr/local/nginx/nginx

/usr/local/nginx/nginx

方法②(-c nginx配置文件地方):

主意贰(-c nginx配置文件地点):

/usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf

/usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf

 

 

停止nginx服务

停止nginx服务

艺术一:从容截止

方法一:从容结束

翻开进程

翻看进度

[root@bogon nginx]# ps -ef | grep nginx

[root@bogon nginx]# ps -ef | grep nginx

root 62024 1 0 07:01 ? 00:00:00 nginx: master process
/usr/local/nginx/nginx

root 62024 1 0 07:01 ? 00:00:00 nginx: master process
/usr/local/nginx/nginx

nobody 62025 62024 0 07:01 ? 00:00:00 nginx: worker process

nobody 62025 62024 0 07:01 ? 00:00:00 nginx: worker process

root 62308 18453 0 07:14 pts/1 00:00:00 grep –color=auto nginx

root 62308 18453 0 07:14 pts/1 00:00:00 grep –color=auto nginx

杀掉进程

杀死进度

[root@bogon nginx]# kill -QUIT 62024

[root@bogon nginx]# kill -QUIT 62024

 

 

主意贰:急迅甘休

措施二:火速结束

翻看进度

查看进程

[root@bogon nginx]# ps -ef | grep nginx

[root@bogon nginx]# ps -ef | grep nginx

root 62358 1 0 07:17 ? 00:00:00 nginx: master process
/usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf

root 62358 1 0 07:17 ? 00:00:00 nginx: master process
/usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf

nobody 62359 62358 0 07:17 ? 00:00:00 nginx: worker process

nobody 62359 62358 0 07:17 ? 00:00:00 nginx: worker process

root 62463 18453 0 07:20 pts/1 00:00:00 grep –color=auto nginx

root 62463 18453 0 07:20 pts/1 00:00:00 grep –color=auto nginx

杀掉进度

美高梅手机版4858 ,干掉进度

[root@bogon nginx]# kill -TERM 62358

[root@bogon nginx]# kill -TERM 62358

或者

或者

[root@bogon nginx]# /usr/local/nginx/nginx -c
/usr/local/nginx/nginx.conf

[root@bogon nginx]# /usr/local/nginx/nginx -c
/usr/local/nginx/nginx.conf

[root@bogon nginx]# ps -ef | grep nginx

[root@bogon nginx]# ps -ef | grep nginx

root 62473 1 0 07:21 ? 00:00:00 nginx: master process
/usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf

root 62473 1 0 07:21 ? 00:00:00 nginx: master process
/usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf

nobody 62474 62473 0 07:21 ? 00:00:00 nginx: worker process

nobody 62474 62473 0 07:21 ? 00:00:00 nginx: worker process

root 62476 18453 0 07:21 pts/1 00:00:00 grep –color=auto nginx

root 62476 18453 0 07:21 pts/1 00:00:00 grep –color=auto nginx

[root@bogon nginx]# kill -INT 62473

[root@bogon nginx]# kill -INT 62473

 

 

形式3:强制甘休

办法3:强制截止

[root@bogon nginx]# pkill -9 nginx

[root@bogon nginx]# pkill -9 nginx

 

 

深感那一个最棒记有未有?

备感那几个最好记有未有?

前几日大致安装就到此处,今日学一下配置. 

明天津大学概安装就到此地,前日学一下配置. 

发表评论

电子邮件地址不会被公开。 必填项已用*标注

网站地图xml地图
Copyright @ 2010-2019 美高梅手机版4858 版权所有